QED Performance XT25 Airloc Pre Terminated Speaker Cables (Fly Leads)

Experience award-winning acoustic precision with the QED Performance XT25 Speaker Cable, custom pre-terminated in-house with factory-standard QED Airloc™ 4mm Banana Plugs. Featuring QED’s proprietary X-Tube™ technology alongside 99.999% Oxygen-Free Copper (OFC), the XT25 eliminates high-frequency skin-effect distortion across the entire audible band. Combined with QED’s high-pressure cold-weld termination, this cable assembly delivers ultra-low resistance, zero air-gap oxidation, and effortless dynamic realism for dedicated Hi-Fi and multi-channel home cinema systems.

Available in various standard lengths: if you can’t see the length you need, please complete the following quote request.

£27.95Various Lengths

Choose Your Cable Length *
Extra subtotal:£0.00
Total price:£23.29
Model: QED/PER/XT25/AIRLOC Categories: ,

Description

QED Performance XT25 Speaker Cable (Pre-Terminated with Airloc™ Plugs)

Bridging the gap between entry-level speaker wire and flagship reference interconnects, the multi-award-winning QED Performance XT25 brings flagship X-Tube™ geometry to custom installations and enthusiast audio systems. Standard speaker cables suffer from the “skin effect,” where high-frequency signals are forced toward the outer edges of the conductor, increasing resistance and smearing fine detail. By arranging its 99.999% OFC conductors around a hollow central air core, the XT25 ensures consistent current density across all frequencies—resulting in breathtaking stereo imaging, tight transient attack, and crystal-clear dialogue reproduction.

Each fly lead is custom-built in-house and cold-welded using QED’s specialised bench-top tooling for a permanent, gas-tight seal that protects your connection against oxidation for life.

Key Features & Benefits

  • X-Tube™ Technology: Arranges 99.999% OFC conductors around a hollow polyethylene tube core to combat the skin effect, delivering near-linear signal transfer and exceptional high-frequency transparency.

  • 99.999% Oxygen-Free Copper (OFC): Provides an ultra-low D.C. loop resistance (0.0134 Ω\m) for maximum amplifier damping control and punchy, articulate bass response.

  • Airloc™ Cold-Weld Termination: Fuses the hollow-core conductors directly to 24k gold-plated 4mm Forté expansion pins under high radial pressure, eliminating contact resistance and atmospheric corrosion.

  • Installer-Friendly 14 AWG Profile: Despite its advanced internal X-Tube™ architecture, the XT25 maintains a compact 3.96 mm jacket diameter with figure-eight geometry—allowing smooth routing around skirting boards, through wall plates, and behind dense AV racks.

  • Low-Density Polyethylene Dielectric: Minimises dielectric energy absorption (35 pF/m capacitance) to preserve micro-dynamics and subtle spatial cues in Dolby Atmos and two-channel recordings.

  • Custom Precision Lengths: Cut and assembled to order by certified technicians to eliminate excess cable coils and ensure clean, clutter-free rack dressing.

Technical Specifications

Parameter Specification Value
Conductor Cross-Section 2.50 mm²  (14 AWG)
Conductor Material 99.999% Oxygen-Free Copper (OFC)
Core Geometry QED X-Tube™ Hollow Core Technology
Dielectric Insulation Low-Density Polyethylene (LDPE)
Termination Type QED Airloc™ ABS / Metal 4mm Cold-Weld Banana Plugs
Plug Plating 24k Gold-Plated Forté Expansion Pin
Loop Resistance 0.0134 Ω/m
Capacitance 35  pF/m
Inductance 0.52 μH/m
Dissipation Factor 0.0001@ 10KHz
Jacket Outer Diameter 3.96 mm 
Available Lengths 0.5m, 1m, 2m, 3m, 4m, 5m, 6m, 7m, 8m, 9m, 10m, 12m, 15m

Length Recommendations & System Matching

  • Desktop & Nearfield (0.5 m – 2 m): Ideal for high-resolution desktop monitors, DAC-amp pairings, and compact bookshelf setups where short, direct paths eliminate cable clutter.

  • Standard Hi-Fi & Front LCR Channels (3 m – 5 m): The optimal choice for main left, centre, and right speakers, delivering pinpoint vocal clarity and expansive stereo soundstaging.

  • Home Cinema & Long Runs (6 m – 15 m): Built for surround, Atmos height channels, or concealed routing through conduit and floor voids; X-Tube™ technology and ultra-low loop resistance preserve high-frequency detail even over extended runs.

Q & A

Ask a question
QED Performance XT25 Airloc Pre Terminated Speaker Cables (Fly Leads) QED Performance XT25 Airloc Pre Terminated Speaker Cables (Fly Leads)
Your question
* Question is required
Name
* Name is required
* Please tick the checkbox to proceed
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
There are no questions yet

Reviews

There are no reviews yet

Be the first to review “QED Performance XT25 Airloc Pre Terminated Speaker Cables (Fly Leads)”

Ask a Question About The QED Performance XT25 Airloc Pre Terminated Speaker Cables (Fly Leads)

[contact-form-7 id="7342" title=""]